Safety board faults key device in BP oil spill
WASHINGTON - A federal investigative board concludes that the last-ditch safety device that didn't stop the 2010 BP oil spill had multiple failures, wasn't tested properly and still poses a risk for many rigs drilling today.
The report issued Thursday by the U.S. Chemical Safety Board zeroes in on what went wrong with the blowout preventer and blames bad management and operations. And that, they said, led to the dumping of 172 million gallons of oil into the Gulf of Mexico.
Investigators have long known that the device failed. But safety board managing director Daniel Horowitz says the problems were worse than officials had figured and are potentially still a problem for some active rigs now.
The massive blowout preventers use multiple mechanisms to choke off the oil flow.
Desktop NewsClick to open Continuous News in a sidebar that updates in real-time.
Strong storms roll through Baton Rouge area
Jury convicts deputy marshal for shooting death of boy, dad\'s injuries
At least 3 injured after tree falls on cars near Tara
Beloved cat with microchip went missing, adopted by another family
Hammond school closed Friday due to Norovirus outbreak